果蔬冷庫安裝設計過程中要防止水蒸氣的擴散和空氣的滲透。設置防潮隔熱層，使冷庫安裝后具有良好的密封性和防潮隔汽性能。冷庫安裝設計過程中，冷風機宜選用自動控制融霜的設備。應有合理的融霜程序，還有冷風機翅片感溫器，防止過多加熱。
During the installation and design of fruit and vegetable cold storage, we should prevent the diffusion of water vapor and air infiltration. The moisture proof and heat insulation layer is set up, so that the cold storage has good sealing performance and moisture proof and steam isolation performance after installation. In the process of cold storage installation and design, the automatic cooling defrosting equipment should be selected for the cold air machine. There should be a reasonable defrosting program and a cold air fan fin temperature sensor to prevent excessive heating.
冷庫機組位置離蒸發器越近越好，且易維修，散熱良好。冷庫機組散熱器安放位置離冷庫機組越近越好。冷庫機組銅管需分別穿保溫管與同方向電線一起用空調扎帶一起包扎好，盡量走直管線并分段固定。電線排放除用空調扎帶扎好外，需用波紋軟管或走線槽穿管保護。
The location of the cold storage unit is closer to the evaporator, the better it is, and it is easy to maintain and heat dissipation is good. The location of the radiator in the cold storage unit is closer to the cold storage unit. The copper tube of the cold storage unit needs to be insulated through the insulation pipe together with the same direction wires together with the air conditioner. The wires should be protected by corrugated hose or line grooves.